Preloader

Essential for your


Preloader

Arri SkyPanel S120 Set

< Zurück zur Übersicht
Arri SkyPanel S120 Set
Arri SkyPanel S120 Set
Arri SkyPanel S120 Set
300,00 €
Preis per Tag ohne MwSt. MwSt wird entsprechend der geltenden Bestimmungen berechnet.

Unser Arri Skypanel S120C ist ein LED Panel, was sich sowohl zur Ausleuchtung des Hintergundes als auch zur Personenbeleuchtung eignet. In unserem Set ist auch der Yoke-Mount enthalten, der eine vertikale Ausrichtung ermöglicht. Außerdem ist im Set auch der Snapbag mit Wabe enthalten, welches die Leuchtfläche vergrößert und für sehr weiches Licht sorgt. Der S120 ist doppelt so lang wie der S60, wiegt aber nahezu dasselbe. Durch die größere Apertur wird das Leuchtfeld noch breiter und weicher. Im Gegensatz zu anderen durchstimmbaren Scheinwerfern geht SkyPanel auch hinsichtlich der Lichtleistung keine Kompromisse ein. Der enorme Licht-Output erfolgt dabei in einem weichen und gleichmäßigen Leuchtfeld. Das SkyPanel S120 übertrifft die Helligkeit von 2 kW Glühlicht-Flächenleuchten oder 6 kW Glühlicht Spacelights und verfügt somit über mehr als ausreichend Leistung für die meisten Anwendungsbereiche. Gleichzeitig liefert SkyPanel auch bei geringen Lichtstärken hervorragende Ergebnisse. Dieses Spektrum an Beleuchtungs- und Farboptionen ermöglicht Anwendern eine beispiellose Kontrolle.

  • Lamphead S120-C
  • Optical System: Soft Diffusion Panel
  • Light Aperture: 1290 x 300 mm / 50.8 x 11.8"
  • Beam Angle: 110° (Half Peak Angle)
  • Weight: Center Mount: approx. 14 kg / 31 lbs, Manual Version: approx. 16 kg / 36 lbs
  • Size w/ spigot (H x W x L):
  • 588 x 133 x 1332 mm / 23.1 x 5.2 x 52.4"
  • Mounting: 28 mm Spigot (Junior Pin)
  • Tilt Angle: +/- 90º
  • Lamphead Voltage Input: 48 V DC
  • Power Consumption: 400 W Nominal, 430 W Maximum
  • Lamphead Power Connection: Male 3-Pin XLR to 15 Amp (Pin 1: Negative / Pin 2: Positive)
  • Battery Connector: Male 4-Pin XLR to 10 Amp (Pin 1: Negative / Pin 4: Positive)
  • Battery DC Voltage Range: 23 to 36 V DC
  • Battery Mode Light Output: 50 % of total output
  • White Light: 2,800 K to 10,000 K continuously variable correlated color temperature
  • Colored Light: Full RBG+W color gamut with Hue and Saturation control
  • Color Temperature Tolerance: +/- 100 K (nominal), +/- 1/8 Green-Magenta (nominal)
  • Color Rendition: CRI Average &gt; 95
  • TLCI Average &gt; 90
  • Green-Magenta Adjustment:
  • Continuously adjustable (Full Minusgreen to Full Plusgreen)
  • Dimming: 0 to 100% continuous
  • Control: On-Board Controller, 5-Pin DMX In and Through, EtherCon LAN network connectivity, USB-A, Art-Net
  • Remote Device Management (RDM*):
  • *RDM Available in Future Firmware:
  • DMX Setup, Hour Counter and Standard RDM commands
  • Software Interface: Ethernet: DMX Setup, Fixture Status and Firmware Upgrade through PC, Mac
  • USB-A: Software Upgrade via flash drive
  • Ambient Temperature Operation: -20 to +45º C (-4 to +113º F)
  • Protection Class / IP Rating: III / IP20
  • Estimated LED Lifetime (L70): 50,000 hours
  • Estimated Color Shift Over Liftetime: +/- 5 %
Detail Value
Actual Firmware 4.2
Type of Lightsource softlight
Color Engine Multicolor RGBW
Powersupply (A) Household 16AH
Power Consumption (W) 400
App for remote operation ARRI Stellar
Power Supply V-mount Adapter available
Kelvin minimal 2800
IP Rating IP54
Kelvin maximal 10000
CRI 95

Diese Produkte könnten Sie auch interessieren:

Alternative Produkte: